0
If it the original GM type remote it requires a scanner programed to do that.
These scanners are thousands of dollars and are only at the GM dealer. So you will have to pay.
The aftermarket remotes have a particular process for each model remote and allarm system or car starter. I recomend a visit to the Installer for that brand in your area. Or look up the remote you have on the net, the instructions are easily available.
What else can I help you with?
How to troubleshoot keyless entry problems in a 95 Grand Prix SE if the remote does not work even with a new battery?
how do you program a keyless entry remote to a 2000 Pontiac grandprix programyourremote.com (program your remote.com)
How do you program a keyless remote Pontiac grand prix 2006?
go to http://www.programyourremote.com/ they have programs for many makes and models
How do you program keyless remote for 2004 grand prix?
To program a keyless remote for a 2004 Pontiac Grand Prix, start by sitting in the driver's seat with all doors closed. Insert the key into the ignition and turn it to the "On" position without starting the engine, then back to "Off" twice, ending in "On." Press the lock button on the remote; the doors should lock and unlock, indicating successful programming. If you have additional remotes to program, repeat the lock button step for each one before turning the ignition back to the "Off" position.
How do you program 1997 Grand Prix keyless pad codes?
iF YOU ARE TRYING TO PROGRAM A DEYLESS ENTRY, IT IS IN THE OWNERS MANUAL. iF YOU WANT ONE TRY motorlit.com
Where is the remote trunk release for a 1993 Pontiac Grand Prix?
The remote trunk release for a 1993 Grand Prix is in the gove box.
How do you replace battery in 2005 Pontiac Grand Prix keyless entry remote?
Insert something thin and hard, such as a pocket knife blade, in between the remote halves. After this, simply pull the halves apart and replace the old battery with the new. Snap the remote back together.
What color is the remote turn on a 2000 Pontiac grand prix?
Black.
How much would a keyless entry remote for a 2003 Pontiac Grand Prix GT cost?
Two years ago, I replaced two transmitters plus programming . Cost 198 bucks. This was on my 97 GT. Good luck. JK I got a key and remote from e-bay for $50, programmed the key and remote myself.
How do you program a 2004 pontaic grand prixkeyless entry?
To program a 2004 Pontiac Grand Prix keyless entry remote, first, sit in the driver’s seat and close all doors. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the "Unlock" button on the driver’s door while turning the ignition to "Off" and back to "On" two more times, then release the "Unlock" button. Lastly, press any button on the remote to complete the programming process; the locks should cycle to confirm successful programming.
How do you reset key-less entry on 2005 Pontiac Grand Prix?
To reset the keyless entry system on a 2005 Pontiac Grand Prix, first, ensure the vehicle is in the "On" position without starting the engine. Then, press and hold the "Unlock" button on the driver's door while simultaneously pressing the "Lock" button three times. Release the "Unlock" button, and the system should beep, indicating a successful reset. Finally, test the keyless entry remote to ensure it's functioning properly.
How do you program the governor on grand prix GT 2002 to go faster?
No.
Keyless entry does not work for 97 Pontiac grand prix gt - The remote does work but will not lock or unlock the doors.?
Stand outside your car holding the remote up against the Driver side window. Hold the Lock and Unlock buttom simultaneously on your remote while pointing your remote at the steering wheel. After about 30 sec. you will hear your horn beep. Your remote has been re-set and should now work.
