http://www.uniden.com/pdf/BC92XLTom.pdf
The manual knows all.
Straight From the Manuel:
Storing Known Frequencies
Into Channels
1. Press Hold. Then enter the channel number where you want to store a frequency, then press Func and Pgm. The channel number appears.
2. Use the number keys and to enter the frequency (including the decimal point) you want to store.
3. Press E to store the frequency into the channel. Notes:
• If you entered an invalid frequency in Step 2, Error appears and the scanner beeps three times. Enter a valid frequency.
• The scanner automatically rounds the entered number to the nearest valid frequency. For example, if you enter 151.473 (MHz), your scanner accepts it as 151.475.
• When you enter a frequency into a channel, the scanner automatically turns on the delay function and DLY appears. When delay is turned on, the scanner automatically pauses scanning
2 seconds after the end of a transmission before scanning proceeds to the next channel. To turn the function off or on, press Func + Dly.
• If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mis- take, press then enter the correct frequency. To enter the frequency anyway, press E to accept.
4. To program the next channel in sequence, press E then repeat Steps 2 and 3.
Follow the link below to download/print the manual for your scanner. It will walk you through the programming process:
http://www.uniden.com/pdf/BC80XLTom.pdf
Programming scanner r1040
easy to program
A scanner is both hardware and software, the device itself is hardware (all devices are hardware) but the driver(a program) that runs it is software.
Press the manuel button then press the channel number you want to program and then press the manuel button again. Press the frequency numbers in t\and then press the "E" for enter. Now your police scanner is programmed. :)
You need a gm scanner to program a factory gm remote fobs.
Pen and paper and scanner.
A network vulnerability scanner is a program written to find vulnerabilities in other programs run on either a computer or the network. There are different types of vulnerability scanners based on what the scanner is scanning.
A automotive scanner with an Asian program is required.
The car is the scanner. Depending on the make and model a new key less FOB can be programmed by pushingcertain buttons on the car in a certain sequence. What year make and model are you trying to program.
here's the way i do it .... press man 0 program enetr freq number
how do i program my radio shack pro 2017 scanner where is my answers
denomanater scanner can program your timing