First, hold down the unlock feature on your door and keep it held down. While holding down, turn ignition key over 2 times and turn off (dont start vehicle). The speed at which you do this is not important, but just turn to where radio will play and instrument panel lights up. After you have done this the unlock-lock will cycle on your doors automatically and the horn will sound. Now, you can let go of the unlock on door and Hold the Lock and Unlock function on the remote, Both at same time! Hold for 15 to 20 seconds until your doors cycle thru lock-unlock. They will do this automatically while you are holding both remote keys. Now, Turn the key over again and then off. This should set your remote to work. If this does not work, there may be a problem with the remote or you may have a remote not compatible with vehicle or even dead battery in remote. Hope this saves someone some time and money!
How do u program a keyless remote for a 2000 GMC Yukon
How do I re-program a remote for a 1997 mazda millinea?
Go to best buy and ask the geek squad!
REad the owners manual. But I believe you have to put garage opener in learn or program mode then depress and hold button on the Yukon this will allow it to program itself to you door remote
If it's the same as the 2003 yukon, you just press the "locked" and "unlocked" at the same time for about 5-6 secs
the dealer normally does this service for no charge
check in your owners manual if you have it.
The dealership scan tool is required.
The 1989 Buick Park Avenue does not come with a remote keyless entry. The keyless remote entry was not available till 1997.
The new chipless key, or unmatched key will need to be reprogrammed into the cars computer.
how do you program your remote
How do i program my remote car starter / lawless remote