to program remote as2501- \the process is also csalled remote learn.\do as follows: Press hod pin switch once and beffore park light goes out press aain one time. \again before the park light goes off
get into the car and turn the key in the ignition switch to RUN aand turn bac k off in one second.
At this point all lights connected to the remote starter should be off except the antenna light. In two seconds or so press the lock button on the remote transmitter repeatedly until the lights start to click repeatedly (five times). That ios all.
the battery died in my remote. After replacing it the auto start will not work. What are the steps I need to take to reprogram it??
http://www.lockdownsecuritycanada.ca/Autostart-Remote-Replacement-Shells-s/560.htm
maybe you need a new battery in your remote control
Press the Menu button on the remote. Choose Channel, and then choose Auto Program.
auto zone sell remote starter ,not neccessarlly expensive but works really good.
This will vary by year of TV but this works often. Make sure to have the TV remote in hand. Press the menu button then choose Setup. From there choose auto program. If it ask you to select a source choose Air or cable. Then there should be an auto program option to press for the channels get programmed.
It was not standard equipment, but it was optional.
There are two levels of "programming" of a Saturn keyless remote: 1. If you are just replacing the battery, follow the instructions on the inside of the remote. 2. If you old remote has failed and you want to use a replacement remote, you have to take it to an authorized GM dealer; only THEIR computer can program the replacement remote to your vehicle. 3. Try looking for someone with a TECH2 scanner that's what the GM guys would use, not OBD2 like they have at auto parts stores. 4. Find an auto locksmith. I found a local one at autolocksmithfinder.us I had mine done for almost half the price the dealer wanted
how or where can i purchase a new auto mate remote contrl for my 2001 toyota sequoia
if it's manual some wont start or should say majority of it wont start, if it was made by factory they might disable it on a manual for safety issues, if it's an auto the wire might came off from the remote module or the battery on the remote is dead. You could also use remote start on manual to if you like, but dealership wont install it for you i highly doubt it. Take it to a shop that install remote starter or alarms, they might be able to make it work for you but it'll be at your own risk for doing it.
on run online
Advance auto and Carquest auto parts.