It requires the dealer's scan tool.
it has to be done by the dealer. =(
You have to program it with a DRB (Scan tool).
how do you program a keyless entry remote to a 2000 Pontiac grandprix programyourremote.com (program your remote.com)
I had the same problem. Google "keyless entry remote 2003 Jeep Grand Cherokee".
bring it to a dealer or a shop that puts them in you need a special computer and codes
dealer has to do it with factory scan tool
The keyless entry system must be programmed with an OBD II tool which the dealer or locksmith has. Sorry that this is not the answer your looking for, I didn't want to hear it either.
iF YOU ARE TRYING TO PROGRAM A DEYLESS ENTRY, IT IS IN THE OWNERS MANUAL. iF YOU WANT ONE TRY motorlit.com
Ou812
YOU CAN FINE ALMOST ANY KEYLESS ENTRY ON EBAY AND FOR A GOOD PRICE.. GOOD LUCK.........
yes they do, i have it on mine.
To reset the keyless entry system on a 1997 Mercury Grand Marquis, start by disconnecting the vehicle's battery for about 10 minutes. Then, reconnect the battery and enter the vehicle. Press the "1" and "2" keys on the keypad simultaneously, which should reset the system. After this, you can program new codes if desired.