How do you program remote on 2001 Lincoln LS?

Answer 1

by Shelby ; Member since: : July 07, 2006 ; Total points: : 39151 (Level 7) * Add to My Contacts * Block User

How to reprogram your remote entry transmitters

You must have all remote entry transmitters (maximum of four)

available before beginning this procedure

1. Ensure the vehicle is electronically unlocked.

2. Put the key in the ignition.

3. Turn the key from the (OFF) position to (RUN).

4. Cycle, eight times, rapidly (within 10 seconds) between the (OFF)

position and (RUN). Note: The eighth turn must end in the (RUN)

position.

5. The doors will lock, then unlock, to confirm that the programming

mode has been activated.

6. Within 20 seconds press any button on the remote entry transmitter.

Note: If more than 20 seconds have passed you will need to start the

procedure over again.

7. The doors will lock, then unlock, to confirm that this remote entry

transmitter has been programmed.

8. Repeat Step 6 to program each additional remote entry transmitter.

9. Turn the ignition to the (OFF) position after you have finished

programming all of the remote entry transmitters.

10. The doors will lock, then unlock, to confirm that the programming

mode has been exited. Fords Owner resource website

in the auto business since 1983 * 7 months ago 100% 1 Vote

* Report Abuse

== * Rating: Good Answer * Rating: Bad Answer

Answer 2

you insert the key into the ignition and turn it forward about 8 times or until the doors look and unlock by them selves. When you do that twist it only half way not to the point where the truck turns on.