only go to hoods in autosculpt, search for blown over, charged or contender
40 hp on a 4.3 tinny works perfect, top speed is too fast, plenty of pull can easily carry a spotter and a spare
They may be defective, or get fouled due to excess carbon build-up. Pull the plug wires one by one to see which cylinder doesn't drop the engine speed, and that one is your culprit.
You can either pull the engine out, or drop the sub-frame. I understand that dropping it is easier.
You'll need to either pull the engine or the transaxle. The engine would be far less trouble, but it will still be a bit of trouble.
Yes, you do or pull engine. Either or have to pull one or the other. The transmission is the easies.
Yes
No
No, you do not have to remove the engine to do a valve job.
Yes, the engine will pull right out without removing the trans.
no
you would need to push it or pull it.
Most FWD cars can still have the engine removed from the top....just as the old RWD cars. If it's an automatic trans unbolt the trans and the torque converter from the engine. Support the trans and leave it in the car. Most of the time it's easier to pull a 5 speed trans with the engine.....but you'll need to be able to tilt the engine quite a bit to clear everything as you pull it.