I have a 98 Bonni and I found the only way to do it is to remove the R/F engine mount spacer..((between the AC compressor and the crankshaft pully))(you must turn your wheels to the right exposing a plastic weathersheild,behind the right wheel. By removing this shield you will see a shrouded 18mm nut. Remove the nut, then with a 8mm socket remove the bolt. There is a metal spacer between the motor mount and the engine block Tap[from the top) and the spacer will come off.)the belt will slide out thourgh that space. Put the new belt on accourding to the diagram given to you at the auto store. Then put everything back in reverse order. I hope this helps out..
diagram for serpentine belt on 1996 Pontiac Bonneville se
Yes, I need a diagram of the serpentine belt for a 1997 3.8 liter Bonneville SE without a turbo charger.
yes
probably
there is no difference between the 2..to be sure when u go to the parts store have him check it out..
To change the serpentine belt on a 2003 Pontiac Bonneville, loosen the tensioner pulley and remove the old belt. The tensioner pulley is the wheel in the belt system that has a bolt through the middle in a slot that can be adjusted. Put the new belt on and tighten up the pulley.
advance auto if located in your area
just need to know where it is located on car
You will need to remove the front engine cover, on your 1997 Pontiac Bonneville, in order to change the supercharger belt. Loosen the tensioner pulley to remove the belt.
Google Pontiac boneville ac compressor bypass pulley. There are a few places that sell a replacement pulley that goes in the spot of the compressor that allows use of the original serpentine belt.
take off serpentine belt unbolt powersteering pump and hoses and drain it. That's it.
A diagram for the serpentine belt for the 1995 Bonneville can be found in an Chilton's manual for that year and make of vehicle. The belt diagram varies depending on the exact vehicle engine type.