1988 thru 1993 Saab 900 is the same as the Saab 9000 as they use the same brakes. 4-bolt, 108mm circle. They use lug bolts instead of lug nuts to secure the wheel to the hub.
loosen the lug nuts with a 19mm wrench. jack up the car. remove the tire. put a new one on. put the lug nuts back on tight enough. lower the car. tighten lug nuts to 90 ft-lbs
To change the a wheel assembly on a car: 1. Loosen the lug nuts. 2. Raise the car as required and put on a stand. 3. Finish taking off the lug nuts. 4. Remove the wheel and put the replacement wheel in place. 5. Put the lug nuts back on, remove the stand and lower the car. 6. Tighten the lug nuts.
you crack the lug nuts, jack the van, remove the lug nuts, take wheel off. put the wheel on, thread the lug nuts on, snug them with the tire iron, lower the car, and tighten them to ~140Nm.
Locking lug nuts are just as strong as standard lug nuts, just as long as they are correctly installed with the proper locking lug nut key wrench.
Changing a tire on a 2001 Toyota Solara is very easy to do. You will first need to jack the car up, then take a tire iron and take the lug nuts off the tire. After you have removed all of the lug nuts, you will then put the new tire on and put the lug nuts on and tighten them.
remembering where you put the lug nuts
The torque for the lug nuts on a cat backhoe 426c depend on what size the lug nuts are; for 1/2 lug nuts the torque should be around 80; for 9/16 lug nuts the torque should be around 140.
5 lug nuts on
5 lug nuts ...
Remove old lug nuts replace with new one. I recommend buying lug nuts from toyota dealers. OEM lug nuts last longer than aftermarket.
There are a couple of different tools that are good for tightening lug nuts. A torque wrench and a lug wrench are good for tightening lug nuts. Typically lug nuts would be tightened with a torque wrench, but a lug wrench is much cheaper.