The following instructions are for the 2000 - 2006 model years of Mercedes Benz S-class vehicles.
1. With the doors closed and foot off the brake, turn the ignition to the "ON" position but do not start the engine.
2. Navigate the heads-up display to the odometer display so it shows cumulative and trip mileage.
3. Press the steering wheel's UP arrow so the "Service Due" warning is shown.
4. Press the ® (Reset) button at the right of the dashboard then release it when
5. The display shows the question "Do you want to reset the Service Interval? If so, press ® again."
6. Press and hold ® for 3 seconds or until the next desired service interval is displayed.
7. Turn off the ignition and remove the key.
8. Celebrate; you have done it!
How do I set the time on the clock on a 1995 Mercedes C220
It is there to remind you that a general service is needed. It is not telling you about any particular problem with the car.this is a service indicator, you set it for the desired timing and it counts down the miles to you nxt service.
You hold down reset button and then set it with tide indicator button.
You will need a scanner that can display the fault codes set in the module. The codes will help you determine the problem.
A Proxy Class will be generated. When we add webreference of webservice. After that we can communicate with Proxy Class in order to communicate with WebService. Another thing that, one Service tag is added to the config file, ther you can set your service parameters.
The reset oil indicator on a 2000 BMW 323i warns the driver that it is time to service the engine. It is automatically set to trigger every 3,000 miles and can be reset once the oil has been changed.
How do yuo set firing order 92 mercedes 500 sl
press the oil botton to bring up oil life then press and hold the reset button for 5 seconds, back to 100%.
Just heard ten minutes ago from my son who has borrowed my 2000 s500 telling me he has reset the clock via the radio in the car.
My 2005 Chevy 4wd, ext. cab,shrt bed, has push buttons to go from(from top to bottom) Auto 4wheel drive, to 2 High , then to N(neutral), and then to 4 high, then to 4 low. At approx. 50,000 mi. the service indicator light came on and indicated "Service 4wd." I re-set the indicator, and forgot about it. Now, at 63,000 mi. it's telling me to service the 4wd, only this time the reset works until I turn the ignition off. when I restart, the service light comes on. However, the indicator lights that show which gear the transfer case is in, does not light up, and there is no automatic shifting of the transfer case. Is there a simple solution to this problem? Recommendations...Please! popo63
There are many great stores to buy a dial indicator set from. Some examples of these stores that sell these sets include GlobalIndustrial and Grainger.
The new E350 is due for the 2009 model year. Mercedes ran the previous model (W210) for seven years and the current model (W211) is set for arrival in 2009.