answersLogoWhite

0


Best Answer

Use the manual or the colour coded threading guide that is inside the front part of the overlocker. Simply pull down the compartment flap where the 'Toyota' logo is and you should see the small diagram. Followed carefully, it's quite easy to re-thread each looper & needle(s). Hope this helps!

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you re thread Toyota 4 thread differential feed overlocker?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the feed rate for cutting double lead threads?

Your feed rate depends on the pitch of the thread i.e. 16 TPI =a feed rate of .0625 To cut a double lead thread you need to either rotate the part 180 deg. for the second thread or change the start point by pitch /2 1/16=.0625 .0625/2= .0312 so your second thread will start .0312 from the first thread.


Whats is a small spool that feeds thread up to interlock with the upper thread and form a stitch?

The smaller thread feed at the bottom of the machine is called the bobbin.


What are the most popular products by Sergers?

There are many popular products offered by Sergers. Some of the most popular products are the Brother 1034D 3 or 4 Thread Serger with Easy Lay In Threading With Differential Feed as well as the Brother 2340V Cover Stitch.


What features do I absolutely need on a sewing machine?

automatic tying of the thread,dropping dog feed is a must


What is the engine size for Toyota GXL 5k engine?

If you mean the Toyota gxl liteace with 5k engine, it is 1496 cc for the gasoline or petrol feed engine.


Does the Singer Quantumlock serger work well on heavy weight fabrics?

Yes it does. All sergers, due to differential feed, can handle heavy fabrics.


Why feed rod is using in the engine lathe?

The feed rod transmits power from the headstock to the carriage for feeding operations.The lead screw transmits power from the headstock to the carriage for screw thread cutting operations. On some lesser types of lathes the feed rod and the lead screw are used for both the feed and the screw cutting power transmission.


Where is the feed fuel line located on a 97 Toyota Rav4?

The 1997 Toyota fuel line connects the injector fuel pump with the fuel tank. The fuel line will travel along the right hand side frame rail to the fuel tank.


What is the purpose of a bobbin in a sewing machine?

A bobbin winder is the part of a sewing machine that takes the thread from a spool of thread and winds it on the bobbin. The sewing machine bobbin is a mini-spool of thread, made of plastic or metal, that holds the thread that will be on the underneath portion of your fabric when you sew. The top thread comes from the spool of thread and the thread on the bottom side of your fabric comes from the bobbin. Instead of winding the thread on the bobbin by hand, long and tedious, the machine will wind it for you if you load it up correctly. Check your owner's manual for instructions. If you don't have a manual, do a google search for it by entering the name of your machine branch and the model # and it will probably find one. Also, any experienced sewer can show you how.


Where is the fusible link in a 1981delta 88?

Usually down by the main starter terminal on the starter. There are 2 or 3 fusible links attached to the battery feed stud mounted on the solenoid (5/16 or 3/8 thread).


How is popcorn used in Christmas decorations in the United States?

The white popcorn is strung together using a needle and thread to make long chains. These are draped over the tree. They can also be placed on trees outside and feed the birds. Mixed with corn syrup and food coloring they can be made into balls to hang on the tree.


What is the apron on a lathe?

The apron on a lathe is suspended from the saddle. It houses a gearbox connecting the carriage hand wheel to the rack enabling longitudinal movement of the saddle. It also houses the half nut and its lever for thread cutting and power feed levers.