Your feed rate depends on the pitch of the thread i.e. 16 TPI =a feed rate of .0625
To cut a double lead thread you need to either rotate the part 180 deg. for the
second thread or change the start point by pitch /2
1/16=.0625 .0625/2= .0312 so your second thread will start .0312 from the first thread.
Lead wipe a brass nipple into the lead pipe and then use a female adapter x PVC on the brass threads
v threads
Pitch measurement refers to the distance from one thread to the next when threads are cut on a lathe. Different threads have different pitches and a lathe can be set to to cut to any specified pitch. This is achieved by selecting the pitch and engaging the lead screw on levers located on the headstock, then engaging the half-nut around the lead screw from the apron. With the correct threading tool inserted threads can be cut into the workpiece.
A .75-10 Unified National Coarse thread (3/4-10 UNC) has 10 threads per inch. The lead would be 1/10 of an inch.
The lead screw moves the turret by a precise increment for every rotation of the screw. This allows the machine to generate threads in a workpiece, to generate precise length and diameter dimensions, and to maintain a constant rate of metal removal.
The feed rod transmits power from the headstock to the carriage for feeding operations.The lead screw transmits power from the headstock to the carriage for screw thread cutting operations. On some lesser types of lathes the feed rod and the lead screw are used for both the feed and the screw cutting power transmission.
presuming you mean the lead screw on a lathe, used when cutting threads on the workpiece, then the screw itself is obviously fixed, but the rotation of it may be able to be changed, depending on the lathe manufacturer.
feed them lead feed them lead feed them lead
Lead wipe a brass nipple into the lead pipe and then use a female adapter x PVC on the brass threads
Were what fitted............?
§ Screw threads have better compression strength than other threads. § Due to low thread angle there is no radial pressure on nut. § Due to smaller angle, the lead of screw is less.
§ Screw threads have better compression strength than other threads. § Due to low thread angle there is no radial pressure on nut. § Due to smaller angle, the lead of screw is less.
v threads
Normally right hand threads BUT many times the cast iron female threads are corroded or damaged thus one uses a fits all plug which is lead and tapped into place not threaded
the leadscrew is used for thread cutting on a lathe
need, lead, weed, etc.The word " Feed" as in feed mebeadShe'd, He'd, deedneed, feed, bead, head, creedneed, feed, bead, head, creedbead Bead, Lead, Feed, She'd, He'd, Weed,
oh god!