actually... all you have to do is go to your nearest auto part store and buy the kit to reattach the rearview mirror to the front window... its really easy or you can just super glue it back on
how to remove rearview mirror in 98 Lincoln continental
I would probably use epoxy if I needed to do that. Make sure the terminals are reconnected and then use an automotive grade silicone or urethane to reattach the mirror glass. Tape up the glass to the mirror housing until it dries, so it won't slip, usually about 24 hours.
I've done a lot of research and trials with failure on a 98 XK8 conv. According to my service manager if you try to remove the windshield bracket it usually breaks the windshield, which is why the dealership won't just replace the mirror anymore. In my case, my mirror still works but hangs or wobbles now that it's glued with windshield sealant to the bracket when the connector broke. My plan is to replace the badly sand pitted windshield through insurance and at the same time purchase a new mirror +/- $500 - 15% coupon ($75) = $425 and have the glass company install the whole thing which they do as part of the windshield installation.
honda dealership much? ask them
If you mean the speed governor, the 5th gen Preludes in general do not have one.
The electric load detector (ELD) is connected to the fuse box.
if the frame of the mirror is still there, then buy a mirror that sticks on and cover the broken mirror. buy this at auto store or bigger retail stores.
Go to this website. It will show how to remove the door panel and the side mirror.
If you are replacing a H22 engine with a later H22 variant it can be done but requires other items to be replaced. Research research research, check the car forums.
remove door panel then remove screws behind mirror. remove door panel then remove screws behind mirror.
CODE 10 for Accord Civic CRV CRX Del Sol Odyssey Prelude 85-98 86-98 97-98 85-91 93-97 95-98 85-98 = IAT Sensor (Intake Air Temperature) defective circuit or unplugged / defective sensor
Code P1491 Means: EGR Valve Lift Insufficient Detected EGR Valve needs to be replaced