Firstly, you would need a very good knowledge of the codes in your state, county, city, and village. You need to have experience in swimming pool electricity ( different codes than house building) - things such as proper wiring gauges and the codes involved in your project. You need a good grasp on swimming pool Plumbing and hydraulics. The hydraulics are involved when you work with pool pumps, heaters, filters and various sizes of PVC pipe and tolerances and hydraulics required in plumbing a pool and or spa. The hydraulics of a pool need to be well balanced. Then there is the area of rebar, bonding of all metal parts, gunite, plaster, tile, grout, caulking, decking and drainage, coping, clearances between the bondbeam, decking and the sub grade compaction. Once that is done you have to look at the compatibility of the equipment. You have to have a system that is well balanced or matched with its related component part. Proper licensing and permits are required. You also need to dispose of all the waste - the old plaster, equipment, plumbing, and anything that comes out of the pool area. There may be many more things that are left out but this touches on a few items involved in refurbishing a pool.
K
If your inground pool has a liner it has probably been in it for years. If you drain it completely you will shift the liner. Don't do that. If you have cement sides your coping can probably be fixed after replacing the metal rail. If the pool has metal sides and wood framework and 40 years old, fill it in and swim at the local pond, you won't like the $$$$$$ it will take to repair it. Most work like this is left to the professionals.
You will first have to drain the pool to a sufficient level to affect the repairs. Maybe a complete draining would be better.
I have etching in my inground concrette pool and i need to know how to fix it. the pool was made in 1973 i bought the house three years ago.
Yes it can be done
They last longer and easier to take care of.
it depends on what the pool is made of if it is concrete then all of if its carbon fiber then about half of it.
The wall is steel and concrete so the short answer is that you do not.
Justin Bieber has a inground pool
the concrete should be 6" according to this site http://www.de-fontenay.com/poolcon4.htm
Yes. Ron Lacher Pool Engineering in southern California probably has an engineering detail showing how to build it.
Any cracks that are in the pool, and if it leaks. See if you can get anyone to come out and inspect the pool.
absolutly not In the case of most pools esp, pools with liners, the concrete rim around the pool is an integral part of the whole structure. It serves a solid rim to support the walls of the pool.
Highly sensitive listening gear while water flows through the pipe
Theoreticaly Yes