0
unloosen the 3 bolts on the alternator and push down on it and the belt will come loose, take the belt off and put new belt over the pulleys and to tighten pull up on the alternator and tighten the bottom bolt first and then check the belt for tightness, when you press on the belt there should be about 1/2 inch play, when you get it set then tighten all the bolts on the alternator and your done.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you tighten the fan belt on a 84 fiero?
There is no fan belt on any year Fiero. Electric fan motor,
Will a gauge cluster from a 89 Trans Am fit 84 Trans Am?
Yes
Where is the water pump on a 84 Toyota corona?
hi its behind the black plastic cover behind fan belts and behind the timing belt,not that hard to change if you mark where the timing belt was and its pulleys ..good luck.
What trans in 84 chev truck with a 305?
TH350
What kind of motor does an eighty-five Trans Am have?
I own an 84 trans am. In the 85 models typically there will be a 5.0 leter V8.
How fast is a stock 84 Trans Am?
Depends on engine, transmission, gearing, etc.
Where to Put oil in 84 Ford Tempo trans-axle?
Auto, or 5 speed ?
What is the maximum speed of the Desoto Deluxe sedan 6cyl 116hp 1952?
With manual 3 speed trans, 85 mph.With automatic trans, 84 mph.
Can a 84 bronco 2 4wd standard trans be towed?
Sure. Everthing in neutral, no hubs locked.
What happened to the Hogan 84 title belt?
hogan probably owns it to this day
Does the driveline engine from 84 Toyota 4x4 fit onto 84 2x4 frame?
Yep. It will be a direct bolt in. You will need to replace trans w/ 2wd trans and get the drive shaft while your at it. Be sure you get the same wheel base or you may find yourself looking for the right driveshaft.
Will the driv e axles on an 84 Fiero 4 sp fit in a turbo trans?
No. Different connectors, different lengths
