Want this question answered?
the starter is mounted on the back of the motor under the intake manifold bolted to the tranmission bellhousing
To remove the cover box to get to the fuel injector on the 2002 Envoy, first remove the intake manifold and the valve cover. You can do this by loosening the four bolts that hold the intake manifold first.Ê
On the back of the engine (passengers side) directly under the intake manifold By the way, the same is true for the 2002 model; passengers side, directly under the intake manifold
It has 2 of them and there both underneith the intake manifold. You can not see are get to them until you remove the intake.
just did this one... i took off the intake manifold and all wires and vaccum hoses conected and then just moved it to the side. gives you plenty of room to remove/install the starter.
It's located under the intake manifold. You must pull the intake manifold to replace it, Mine went out at 280000 miles.
It has 2 of them and there both underneith the intake manifold. You MUST remove the intake to service them.
what are the torque specifications for 2002 ford 4.0 intake manifold
It has 2 of them and there both underneith the intake manifold. You can't see are get to them until you remove the intake.
ON 2002 it is on the top right side of the engine between the intake manifold and timing belt housing, will need to remove the intake manifold and radiator to replace. 4 hrs work
The starter is located under the intake manifold. You will have to remove the intake manifold being very careful not to drop any of the bolts into an in port. The starter is fairly easy to access once the manifold is off.
Yes they do at the intake manifold gaskets.