If it doesn't have manually locking hubs on the front wheels, It means it's a "constantly" locked front 4x4. You don't have to lock them, they already are.
how do you remove 4x4 switch on a 2007 gmc envoy
that's a stupid question, auto 4wd hubs have no place to put the locks that engage the 4wd, that's why its called auto 4wd, so u don't have to get out of ur car and lock them in
you remove it
You can install locking hubs but it does not bypass the push buttons. You still need a way to switch from 4w to 2w. I suggest swapping out your push button with a manual lever floor switch. The electronic push button thing is garbage. As for the locking hubs try talking to your local garage
Replace Remove starter Remove solenoid at top of starter Remove front end of starter for access Remove locking washer from starter shaft Drive should slide off shaft
Need more specifics on this question. What isn't locking in? does the transfer case lock in? Do you have aftermarket hubs? Sometimes you need to make a full tire rotation backwards for the hubs to lock. The hubs could be broken inside.
36mm
blower motor for 1998 gmc sierra 4x4 is located on the passsenger side,under the dash, you will need to remove the glove compartment door for easier accessand to remove blower motor cover.
mounted to the front hubs remove calipers and rotors follow the wire that runs to the hub
15 mm
how to injetor for 1989 gmc 12 4x4 ihave