0
What else can I help you with?
What socket is needed for the front axle nut for the hub assembly on a 1984 Chevy pickup?
A 11/16 socket is needed to remove the 1984 Chevrolet pickup front axle hub assembly. The socket should be a five-point socket.
How do you remove rear axle from 1993 GMC Sierra?
take off the drum stick a socket wrench through the hole in the axle and undue the four bolts then pull the axle out.
What size socket should be used to remove a 1994 corolla front hub bearing?
For Axle Nut its 30mm
What size socket do you use to remove the front axle nut on a 2001 dodge caravan?
1 1/4 inch
What size socket is for front axle 95 maxima axle nut?
32mm
Axle nut socket size for a Ford Tempo?
what size socket for front axle nut 1991 ford tempo
What size socket for 92 Ford Tempo axle nut?
what size socket 92 ford tempo front axle
Can you remove oil pan on 2004 Dakota with 5.9 v8?
Yes, if you remove the front axle first.Yes, if you remove the front axle first.
What size socket to remove axle nut on front gmc Yukon Denali 4x4?
To remove the axle nut on a front GMC Yukon Denali 4x4, you typically need a 36mm socket. It's important to ensure that you have a sturdy breaker bar or impact wrench, as axle nuts can be torqued quite tightly. Always double-check the specific model year, as socket sizes can vary slightly between different years or configurations.
What size socket do you need to remove the front axle nut 2003 dodge truck 1500?
1 and 11/16 inch
How do you remove the front axle on a 2004 Honda shadow 600 vlx?
To remove the front axle on a 2004 Honda Shadow 600 VLX, start by securing the motorcycle on a stable stand. Loosen the axle pinch bolts on both sides of the front fork, then use a socket wrench to remove the axle nut on one side. Slide the axle out from the opposite side, ensuring that the brake caliper and wheel are supported during the process. Finally, carefully detach the front wheel from the forks.
How do you change a rear axle seal on a 2003 gmc 2500 hd sierra?
Remove the tire and wheel from your 2003 GMC 2500 Sierra. Remove the end of the axle. Using a seal puller remove the axle seal. Reverse the process to install your new rear axle seal.
