first drain you coolent liek half way then pull your valve covers pull your intake disconnect your exhaust system from your heads then simply undo the 17 head bolts and then wiggle and pull and then should pop right off but be carefull because there is a coolent crossover on the rear of the heads that breaks very easily so you'll need to people unless you can get the bolts loose for the crossover its a pretty big job but if you know what your doing it can be done in a weekend
can the heads be remove and install in car with out removing motor Yes. Im doing that now. Be careful with pipe at the back. They expensive to replace.
take out the dash
does a 99 camaro fornt end fit a 95 camaro
hyper chip programer
how to bypass vats on 95 camaro
open driver door look on side of dash remove cover there it is.
just pry them out. two metal clips hold it in.
Yes
Yes
If one is present, it is on the right-hand side at the rear of the car after you remove the hard-plastic covering in the hatch.
what about the brights?
don't cut or remove any cables! you could set off your air bags! Just remove the fuse for it in fuse box.