There are many different locations in which someone can purchase truck bed rails. The websites eBay, Amazon, and Auto Anything are great stores to use.
I would suggest buying truck bed rails if you intend to do any sort of heavy work with your truck. I know a lot of landscapers use them, as a good amount of equipment and debris is being slung over the sides of the bed.
LMC Truck
under the bed of the truck you will see the 2 frame rails running paralle front to back. There is prolly gonn be 3 bolts on each frame rail conecting to the bed. remove those and 4 guys should be able to lift the bed off.dont forget to disconnect the gas hose neck
dumptruck hydraulic pump is filled from a separate tank installed on truck it is either hanging off chassis rails on side,between dump bed and cab,or it is between rails under neath dump bed. if under dump bed,u can fill with a hose with funnel joined to hose, takes a while to do this . or if truck bed is not loaded you can raise bed with a crane or other machinery ,enuff to get at tank
remove the bed of the truck.....
Easy 4 to 6 bolts.
dodge truck beds bolt on from the bottom, you will need to remove the rear bumper assembly and the fuel filler neck from the side of the bed too. then just call a few friends to help lift.
Remove the fuel tank or remove the bed.
Remove all of the visible screws from the truck bed and from around the cab. I think there are 5 along the bed rails 8 around the cab. There are two hidden bolts on the very rear. You need to remove the interior panels and hidden under there is a bolt on each side that needs to be removed. After that, it just lifts off.
there should be between 4 or seven bolts located on the base of the bed did you look under the truck for any bolts connected to the frame in the rear?
yes