If it is anything like a '96 F-350, simply pull. There is a clip on each side of the horn area and they should release with pressure applied from the dash side of the cover.
it should be under your steering wheel you might have to remove cover under steering wheel to find it
its underneath the steering wheel... you just need to remove the cover and its right there
by changing the steering wheel and fixing wats rong wif tha steering
Yank it off
Under the steering wheel, you need to remove the panel under steering wheel.
You need to get a special tool, steering wheel puller. If you have it, disconnect the battery. Remove the steering wheel air bag (there are two screws holding it in place). Disconnect the bag harness. Remove the center steering wheel nut. Using the puller remove the steering wheel. Installation is reversed to removal.
There is a pin that goes in the side of the steering wheel. Take off the sterring wheel and cover. You should see a hole and the pin goes in there
With extreeme care. I have a steering wheel puller, a phillips driver and a star driver to fit all screws.
how do you fix play in a 1997 mercury mountainer steering wheel
It is an open circuit in the drivers airbag. There is a clockspring behind the steering wheel that may be worn. To replace, remove airbag, steering wheel, column covers, and lower dash cover. MAKE SURE WHEELS ARE STRAIGHT. The new clockspring comes centered with a yellow locking tab. Remove that after installing it.
youll have to remove the air bag pad and horn contact pad and steering wheel. there is then underneeth a steering lock plate , yull need a steering wheel puller for(also for remoal of the steering wheel) and also to depress the spring loaded lock plate to remove the c-clip then slowlly release the pressure on the lock plate and remove it underneah will be the signal light switch assmbly.
how to remove a power steering pulley on a 1997 Nissan altima