Drain the coolant from the petcock valve on the drivers side of the radiator using a hose to direct the flow of coolant to a container such as a gallon water jug. Remove the front bumper, headlights, radiator fan. Disconnect all coolant hoses. remove the intercooler. Disconnect the oil cooler from the readiator but leave the oil lines hooked up.
Drain the coolant from the petcock valve on the drivers side of the radiator using a hose to direct the flow of coolant to a container such as a gallon water jug. Remove the front bumper, headlights, radiator fan. Disconnect all coolant hoses. remove the intercooler. Disconnect the oil cooler from the readiator but leave the oil lines hooked up.
how do i replace the front strut on 1999 Saab 9-3
how do you replace an alternator on an 1999 Saab 9-3
To change oil in Saab 9-3 the hood will need to be opened and then the oil drained by using the drain pan. With the oil plug removed, the oil can now be changed.
Where is the thermostat on a 1999 dodge 2500 where the top radiator hose meets the engine. You will have to remove 3 small bolts. take about 3 minutes to change it.
there are 3 relays down at the bottom between the 2 fans you will have to remove the plastic splash panel from under radiator support to get to them
In a 1999 Saab 9-3, the blower motor is located inside the passenger compartment, behind the dashboard on the right side. To access it, you typically need to remove the glove box and some panels. The blower motor is mounted to the HVAC unit, and it's responsible for circulating air through the vehicle's heating and cooling system.
6x9 in the back 3.5 inch in the front
not possiable as the key is built into the Saab radio DICE which is your radio and your imobiliser ststem
follow top radiator hose. 3 1/4 blots remove clamp on hose
its on the rear of the unit but normally clarion or kenwood
changed from green to red top in 1999