answersLogoWhite

0

Remove the serpentine belt. Tensioner is below Alternator. Remove the three mounting bolts on the tensioner baracket assembly. Replace entire unit.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

How do you remove the bumper on a 1997 Pontiac Sunfire 4 door?

The 1997 Pontiac Sunfire front bumper is held in place by six retaining clips and for retaining bolts. Remove the retaining bolts and pry outward on each retaining clip.


How do you know when thermostat is bad in 1997 Pontiac sunfire?

how do you know when thermostat is bad in 19997 Pontiac sunfire


How do you change the tag light bulb in a 1997 Pontiac sunfire?

You must first remove the trunk door facia. (This is the part with the "Pontiac" lights in it.) Then you can get to the bulb to replace it.


Headlight adjusting screw on 1997 Pontiac?

where the headlight's adjustments screws for a 1997 Pontiac Sunfire are located


Where is the Transmission dipstick for a 1997 Pontiac Sunfire?

there is not one


Does an 1997 Pontiac Sunfire have and AC filter?

A 1997 Pontiac Sunfire has an AC Filter located in the cabin. The filter can be found behind the glove compartment and is used replaceable.


How do you change the supercharger belt tensioner in 1997 Pontiac Grand Prix GTP?

How do you change the supercharger belt tensioner in 1997 Pontiac Grand Prix GTP?


Does a 1997 Sunfire have a voltage regulator and where?

A 1997 Pontiac Sunfire would have a voltage regulator and it would be found inside the alternator.


Is there a diagram for vacuum hoses on a 1997 Pontiac Sunfire?

A diagram for the vacuum hoses on a 1997 Pontiac Sunfire is located in the service manual. It outlines where each hose goes and its function.


Where is the horn relay on a 1997 Pontiac Sunfire?

See stvndberryhill's answer under 1998 Pontiac Sunfire horn relays. This answer applies to all year models of Pontiac Sunfires.


How do you replace the belt on a 1997 Pontiac Sunfire?

Note:The drivebelt routing decal on the radiator shroud to help during drivebelt install * To replace the belt rotate the tensioner pulley clockwise to release belt tension * Remove the belt from the auxiliary components and slowly release the tensioner * Route the new belt over the various pulleys again rotating the tensioner to allow the belt to be installed then release the belt tensioner


What is the average life of a 1997 Pontiac Sunfire?

15 years