The stock stereo, from a 2003 Nissan Altima, can be removed by first removing the stereo front cover. Next, remove the four screws. Pull the stereo out and remove the wiring.
Check this Web; http://www.installdr.com/TechDocs.html
Remove the retaining cover from your factory stereo. Remove the factory stereo retaining bolts. Slide the factory stereo out. Remove the wiring harness and the antenna cable from the back of the factory stereo.
Remove the 2002 Dodge Durango factory stereo decorative cover. Remove the factory stereo retaining screws. Pull the factory stereo out. Remove the wiring harness and the antenna cable from the back of the stereo.
How do you remove stereo from 2000 nissan pathfinder?
color codes for wiring on factory stereo on 2008 Nissan sentra?
Turn the dimmer switch up. Just kidding I'm sure you looked for that.
How to remove factory stereo from 2001 honda civic?
go to0 a stereo shop and buy one and have it installed go to0 a stereo shop and buy one and have it installed
you have to remove the front console. take out the ash trey. and remove all the screws around the trim of the area of the stereo and then slid the stereo out and un hook all connections. if you get a new stereo it should have more detailed instructions
the acutually dash removal of the Comfort-Control Toggle Switch in order to remove facing for radio replacment of 1990 nissan maxima?
To remove the factory stereo on 1996 dodge ram 1500 you need to pop the hood on the Ram and remove the ashtray. Slide the stereo out of the dash and unplug the cables from the back of the stereo.
Remove the decorative stereo retaining cover. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness and the antenna cable.
Go to instaldr.comthey offer step by step instructions with color pictures!! best sight I've found so far!!
The 2002 Nissan Pulsar Factory Stereo wiring diagram can be found in the maintenance manual. It can also be found in the cars repair manual.
AnswerIt's located under the factory stereo in Premium sound models. Here's a link to show you where and how to remove it!Good Luck!-Shaun-
1) drive to a dark gheeto alley. 2) leave the car windows open. 3) And when you come back in the mourning wahlaa your stereo will be gone !!!:D
depends on how you drive it.my dad has a 1998 nissan altima gxe and it has a quarter of a million miles on it and it still drives like it just came from the factory and he has a large stereo system in it to.
You need to remove the two screws underneath the woodgrain lookin face, and theres two more screws at the bottom hidden under the wood grain lookin plate around the shifter. You need to remove the one around the shifter to get to them. After you have removed the face plates there's four screws holding the stereo unit in, remove them, pull your stereo out and unhook the harness's.
When making any electrical changes to the wiring of a car, it is important to have a diagram. A diagram for the factory stereo wiring of a 1993 Nissan Pathfinder can be found in the maintenance manual.
There is no way possible to remove the stereo and replace it with an aftermarket stereo. I have talked to 15 Nissan Dealers and Nissan head technical office. They all state that it can not be done. --+Skifo How Much
WHAT YOU HAVE TO D IS REMOVE WITH A SCREW DRIVER THE LITTLE COVER BETWEN THE SWITCHES FRO THE EMERGENCY LIGTHS AND THE DEFROSTER UNDER THIS COVER IS A LITTLE SCREW REMOVETHAT SCREW AND JUS PULL THE TRIM THEN YOU JUST HAVE TO REMOVE THE SCREWS THAT ARE HOLDING THE STEREO IS REALLY SIMPLE
Watch the following video. It give a clear step-by-step overview of the process. http://www.youtube.com/watch?v=hlp2KuWpoFI
send this question next week I will be replacing the stock stereo this weekend if weather permits