first you need to take the headlights off. you also need to unclip the wheel arch liner. there are three bolts holding the bumper to the front wing. you need a ratchet socket because its hard to manoeuvre a spanner in the space.once you undo the bolts the bumper will just fall off
To remove the air filter on the Fiesta MK6, first remove the bolts on the top of the air filter box. Then, pull upward to remove the rubber gasket around the box. Remove the screws at the rear of the box. Remove the filter and replace it.?æ
the mk6 fiesta 1.25 has 75bhp.
Yes,the mk4 and 5 chassis' are identical and generally any fiesta front wheel drivetrain can be transplanted into any other fiesta engine bay up to mk6.
Depends on the engine. A variety of different petrol engines and a diesel option were fitted to the Fiesta Mk6. All have different filters.
The Ford Fiesta rear speakers measure five inches by seven inches. The front speakers measure three inches by five inches.
Mk6 1.4 Duratec SE 16v 02> gap should be 1.3mm.
Nope, pins are different.
in the door panel and in the the rear side panels. hope this helps
Hi about removing the door handles from ford fiesta there is no problem doing this when you open the door on the side of the door you will see a screw in line with the handle take this screw out and when you do this catch the handle as if you were opening the door take it handy the back part of the handle will come out then gust wiggle the front bit out bob your uncle Frank
Yes they will all fiestas from mk4 to 7 as far as i know all have the same 5.5mm space of alloys
Take it to a specialist, I've looked on here and nobody knows!
5" X 7", & aparently 20 watts each