Remove the wheel, remove the two caliper bolts and hang the caliper with a wire or bungee cord: you don't want any pressure on the brake hose. Then remove the two caliper carrier bolts and remove the carrier. The rotor just slides off after that.
Remove the tire and wheel from your 1999 Chevy Cavalier. Remove the brake spring and the caliper. The brake pads will come off. Tap on the rotor with a hammer or mallet. The rotor will slide off. Reverse the process to install the new brakes and rotor.
Remove the tire and wheel from your 1995 Chevy. Remove the brake assembly. Tap on the brake rotor with a mallet or hammer. The brake rotor will slide off.
The front brake rotor, on a 2004 Chevrolet Colorado, can be removed by first removing the wheel. Next, remove the brakes. The rotor will slide off
Remove the wheel,remove the brake caliper, it may have a clip on the lug nut stud, just grab it with needle nose plires and twist it till it breaks off and then the rotor should just fall off.
Pull the wheel, pull the caliper and the rotor comes right off. You may have to tap the back side of it to loosen it up.
Remove the tire and wheel from your 1995 Chevrolet K 3500. Remove the front brake assembly. Tap on the brake rotor with a hammer or mallet until it becomes loose. Slide the brake rotor off.
You will need to remove the tire and wheel from your 1995 Chevy Cheyenne. Remove the brake assembly. Tap on the rotor with a hammer or mallet. The brake rotor will slide off. Reverse the process to install the new brake rotor.
Front or rear, remove wheel, remove caliper, remove caliper bracket, remove rotor.
Remove spindle cap, cotter pin, spindle nut, outer bearing. Now you can pull off the rotor which has another bearing on the back and a seal.
The front hub takes a 35mm deep socket. (It is not necessary to remove the hub to change the rotor.)
How do you remove a front rotor on a 1993 F 150 4X4
Minimum thickness is stamped into the rotor. Use a wire brush to remove the rust buildup and you'll see the spec.