0
Add your answer:
Earn +20 pts
Do you have to take of harmonic balancer when replacing water pump on a 97 Chrysler Concorde 3.5?
Yes, and I would recommend replacing the timing belt at the same time.
Do you need a pulley to take off timing cover gasket on a 97 dodge Dakota?
The harmonic balancer does require a puller if that is what you are asking.The harmonic balancer does require a puller if that is what you are asking.
Where is the crank sensor on a 97 Bonneville 3.8 liter engine?
behind the harmonic balancer pulley, i believe.
Removing a harmonica balancer off a 97 Chevrolet lumina?
Harmonica is an instrument that is played with the mouth. A HARMONIC balancer on an engine is removed with a tool commonly referred to as a hormonic balancer puller.
How do you change the crankshaft sensor on a 1997 camaro?
Buy a haynes manual which will explain everything to you. You can pick one up for about 20 bucks at a local auto parts store. what engine size? most gm's in 97 are sensed by the harmonic balancer. remove balancer and replace.
Where is crankshaft position sensor on 97 buick lesabre 3.8?
The Crankshaft Position Sensor is behind the crankshaft pulley (harmonic balancer). You will need a ½-inch drive breaker bar and appropriate socket.
Where is the cranshaft position sensor located on the 97 Chevy Tahoe?
It is bolted in the passenger side of the timing cover on the front of the engine / Behind the front bottom pulley / behind the harmonic balancer on the front of the engine.
What size socket fits on the large center bolt of the harmonic balancer on a 97 3.9 magnum engine?
1 1/4 inch1 1/4 inch
97 Chevy s10 replacing timing chain Where is the marks?
on the harmonic balancer there are two marks, one set at 12o'clock and set at 3o'clock, standing in front of the engine, where do both marks need to be set?
Where is the fuel filter located on a 97 Chrysler Concorde?
By the fuel tank
What is the Oil capacity Chrysler Concorde 3.5?
The oil capacity of a 93-97 Chrysler Concorde with a 3.5 liter engine is 5.5 quarts.
What would make a 97 park ave make a knocking noise when you start it?
It could be the harmonic balancer. This is the first pulley on the engine drive shaft that drives all the other pulleys with the serpentine belt. It is quite easy to look at it and see if the rubber has deteriorated. I had this problem with my '92 PA.
