Beat around it with pref. a dead blow hammer or you hold a board against it and use big hammer
Ebay
A Chrysler LeBaron has a timing belt.
32 mm
how to take off wheel hub on ford 94 F350 dual?
The front wheel hub on a 1994 Honda Civic is connected to the upper control arm and lower. Remove those as well as the axle. Also remove the brake caliper, rotor, and pads. The hub will come off and the studs will then be able to be reached.
Lug studs on a 1994 Acura Integra is pressed into the hub. To remove the lug studs safely raise and prop the car. Remove the wheel, brake components, and suspension parts from the hub. Press out the old studs.
It takes a 1 1/4 inch socket
39 psi +/- 5
remove the bolts around the outside of the hub. pull it off. then remove the next set of bolts to remove the inner hub. there may be a snap ring to remove the inner hub as well.
use a slide hammer to remove the hub from the bearing. do this on the car. or remove complete knuckle and press hub out with a press
Remove the rear wheel, then the wheel hub should be on four bolts. Remove the bolts and remove the hub. Very easy job.
Need more info - which engine? 2.2/2.5? By 1989 no LeBaron had a carb.