These directions are for a 240.
They may help you understand what you are in for.
http://importnut.net/steeringswap.htm
You can remove the steering will, on your Ford Ranger pickup truck, by removing the steering wheel pin. Remove the wiring harness and the steering wheel will come off.
look at top of steering wheel column.
remove s.w.cover ,remove bolt,use s. w.remover
cut the cheese
Does it have airbags ? If not the centre of the steering wheel will have a removable badge or logo, remove this and you will see a nut that needs to be loosened with a wrench/socket
To repair a horn on the 1978 Chevy pickup, first check to make sure the wiring is correct. Then, remove the steering wheel cover in order to check to be sure the wiring is connected to the steering wheel.
first check power steering fluid,if to low then air is inside causing noise or p.s. pump is bad.
A person needs a steering wheel puller to remove a steering wheel. It will help remove the steering wheel by putting pressure on the middle and by pulling up on the rest of the steering wheel.
Remove the steering wheel, Then remove the turn signals section. This takes some special tools.
To remove the steering wheel from your 1985 Chevy Celebrity: First remove the horn button. There should be a keeper at the tip of the steering shaft, remove it. Remove the nut that holds the wheel in place. Use a steering wheel puller to actually remove the steering wheel.
Local car part stores have a tool called the steering wheel puller, that has to be used to remove the steering wheel. This is used to remove the steering wheel by applying pressure to the middle and pulling up on the rest of the steering wheel to remove it.
Disconnect battery. Remove air bag. Remove bolt holding steering wheel to column. Use a steering wheel puller to remove wheel from column.