To change the brake lights on a 2004 Toyota Prius, first, open the trunk and remove the two plastic covers on the inside of the trunk, which protect the tail light assembly. Next, unscrew the nuts holding the tail light assembly in place and gently pull it out. Disconnect the wiring harness from the assembly, then twist the brake light bulb socket counterclockwise to remove it. Replace the old bulb with a new one, reassemble everything by reversing the steps, and test the brake lights to ensure they work.
To remove the tail light assembly on a Toyota Cressida, first, open the trunk and locate the access panel behind the tail light. Unscrew or unclip the panel to reach the tail light's mounting bolts. Remove these bolts, then gently pull the tail light assembly out from the body of the car, disconnecting any electrical connectors if necessary. Finally, set aside the assembly for replacement or repair.
To change the fog lights on a 2007 Toyota Prius, first, ensure the vehicle is turned off and parked on a level surface. Open the hood and locate the fog light assemblies behind the front bumper. Disconnect the electrical connector and twist the fog light bulb counterclockwise to remove it. Replace it with a new bulb, reconnect the electrical connector, and secure the assembly back in place.
Look in the trunk, there is a cover over the light assembly - open and you will have access to change the light.
Open trunk and remove screws that secure light assembly to car. Pull assembly straight back to remove from car. Remove the dead light and replace with proper new light. Install in reverse order of removal.
Question isn't clear. Are you asking how do you replace the bulb -OR- how to remove the entire lens assembly?
It's removed from inside the rear compartment. Open the rear hatch and on the inside of the light you will find a snap-off cover. open it and remove the light assembly with a 1/4 turn. The bulb assembly should pop out
There are numerous features that come standard on a Toyota Prius. Some of the features that come standard on a Toyota Prius are light-emitting diode headlights, the smart key system, and anti-lock disc brakes.
Open the trunk; Remove the trunk liner; Remove the bulbs/wiring; locate the bolts securing the tail light assembly to the body; Remove the nuts; lift the assembly away. Cheers
Open the tailgate and look between the tail light assembly and the tailgates weather striping. You will see two galvanized Phillips head screws. Remove them and pull outward and the tail light unit will pop out. The bulbs are screwed into the back of the tail light assembly.
To reset the engine light on a Toyota Prius, disconnect the negative battery cable and let off for about five minutes, then reconnect it. The light should go off after the first couple start ups.
On a 2012 toyota Highlander, How do you replace tail light Assembly