answersLogoWhite

0

Open trunk and remove screws that secure light assembly to car.

Pull assembly straight back to remove from car.

Remove the dead light and replace with proper new light.

Install in reverse order of removal.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you replace the brake light on a 2003 Toyota Echo?

To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.


How do you replace a brake light on a 2003 Mercedes Benz?

From inside the trunk.


How do you replace the high mount brake light on a 2003 toyota matrix?

To replace the high mount brake light on a 2003 Toyota Matrix, first, open the rear hatch and locate the plastic cover over the brake light. Carefully pry it off using a flathead screwdriver or trim tool to avoid damaging the clips. Once exposed, disconnect the wiring harness and remove the old bulb by turning it counterclockwise. Insert the new bulb, reconnect the wiring, and snap the cover back into place.


Removing front brake rotors on 2003 Toyota Tacoma?

how do i remove the brake rotors for a 2003 Toyota tacoma v6 2wd


How do you replace rear brake bulb in upper light in 2003 Lexus Es 300?

y


Dash board light for brake in on Toyota Highlander 2003?

If it is your emergency brake warning light, the switch that warns you that the brake is applied may be out of adjustment.HOWEVER - if it is your brake system warning light - GET IT LOOKED AT ASAP - The vehicle's on-board computer is sensing that there's something wrong with it.


How do you replace a drive belt in a 2003 Toyota Corolla?

how to replace drive belt 2003 Toyota matrix


How do you reset worn brake pad light on a 2003 Eurovan?

replace sensor when pad repacement is done


I have a 2003 Toyota Camry and it makes a grinding noise when you stop or brake?

Your front breaking pads are needed to be repalced, you might have to replace rotors.


How do you replace the rear brake light bulb on a 2003 PT cruiser?

take screws out of lense and pull bulb out.


How to Replace parking brake cable 2003 Ford Escape?

video on how to replace parking brake cable in ford escape 2003


How do you replace a brake light bulb on 2003 Toyota 4runner?

Open the rear hatch and look directly behind the bulb on the inside of the compartment. You will find a small snap-off door, open it. Reach in and twist off the bulb plug to reveal the light assembly. Pull out the bulb and replace with a new same type bulb and replace everything.