Make sure the vehicle is on a jackstand or very safely supported. Spray PB blaster or another penetrating lubricant in to the lug holes on the wheel. Let it set up for a little while.Believe it or not a can of coke will also work. Get a hammer and use sharp blows where the tire and wheel meet on the BACKSIDE of the wheel rotate the wheel every couple of hits. I have over 12 years experience at a tire and wheel shop and this is the method. When you get it off clean the hub and any where else they make contact and put grease on those points good luck to you.
Remove the tire and wheel from your 1995 Chevy. Remove the brake assembly. Tap on the brake rotor with a mallet or hammer. The brake rotor will slide off.
Remove the wheel and tire assembly and the brake caliper then the brake rotor will slide right off.
Remove the tire and wheel. Remove the brake pad springs and hardware. Remove the brake rotor. Reverse the process to install the new brake and rotor.
Remove the tire and wheel from your 1995 Chevrolet K 3500. Remove the front brake assembly. Tap on the brake rotor with a hammer or mallet until it becomes loose. Slide the brake rotor off.
It can be easy to change the brake rotors. Lift the car, remove the tire, brake shoe and rotor, put on the new rotor, replace the brake shoe, tire and lower the car.
Remove the tire, brake caliber and the rotor should side off the hub.
Remove the tire and wheel. Remove the brake pads and break hardware. The rotor will slide off. You may need to tap the rotor with a hammer.
Remove the tire and wheel. Remove the brake pads and break hardware. The brake rotor will slide off. You may need to tap the rotor with a hammer.
You will need to remove the tire and wheel of your 1998 Oldsmobile. Remove the brake pad assembly. Tap on the brake rotor with a hammer or mallet. Slide the brake rotor off. Reverse the process to install the new rotor and pads.
Remove the tire and wheel from your 1993 Lincoln Town car . Remove the brake spring and break caliper. Remove the brake rotor by tapping on it with a hammer or mallet. Slide the rotor off. Reverse the process to install the new rotor and brake pads.
Remove the tire and wheel. Remove the brake pad hardware. Remove the brake pads. Remove the rotor. Reverse the process to install the new brake pads and rotors.
It is important for a person to learn how to change the brake rotors. A person needs to lift the car, remove the tire, brake shoe and rotor, put on the new rotor, replace the brake shoe tire and then lower the car.