You must remove door panel and replace window regulator.
remove the door panel
remove back seat, remove screws bottom and top of panel, remove panel. remove 3 bolts and motor arm, window and regulator will pull out.
You will need to remove the inside door panel of your Chevrolet Blazer. Remove the window retaining clips. Put the window back into the window track. Tighten the window retaining clips.
http://site.oemdirectsolutions.com/ offers a painted to match panel for $229.
I had to to take the door panel off remove the window motor raise the window then put the motor back on
Remove the inside door panel of your 1999 Chrysler Intrepid. Remove the window retaining clips. Put the window back into the window track. Secure the window with the window retaining clips.
Remove the decorative cover to the window switch panel. Remove the window switch retaining screws. Remove the wiring harness from the back of the window switch. Reverse the process to install the new window switch.
Remove the inside door panel. The entire window mechanism will be visible. Put the window back onto the window track.
lower window to down position(if you can) remove door panel remove window weather stripping remove black window surround (should be a screw on top of surround towards back edge) then stationary window should unbolt then remove pins that hold operator to track pick up and pull out the operating window reveverse putting in
You will need to remove the inside door panel. With the door panel removed the entire window mechanism will be visible. Set the window back on the track and secure it with the retaining clips.
To set the power window back on track in a Ford Focus, you have to remove the door panel. Once you get in there, you will see the track that you will need to put the window back on.
On a 1995 Chevrolet Caprice your door panel and window switch are two different parts. To remove the door panel you remove the 8 screws along the outer edge of the door and then pull the panel off. to take the switch off there are 4 more screws on the back of the panel you remove