Your going to have to take off the door panel. After you do that you will be able to see the door handle held in by rivets that have a metal that is bent out to hold it in place. Your going to have to bend them straight to get the handle out. Better off going to the dealer where they have the correct tool for it. I had the same problem on the same door. Goodluck
Its on youtube
Door handle to what?
you can find the answer on this site, a few questions above this one. it is the same as the 1997 ford explorer
Remove the inside door panel from your 1984 Chevy Caprice. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new exterior door handle.
you never gave me the answer.....
hi i have a 2001 tacoma and the 2 exterior door handles are broken what tools do i need ??
Remove the door panel. Drill out the rivets in the exterior handle with a 1/4 drill. Carefully pull the handle out and disconnect the pull rod. Use small bolts and lock nuts to reattach.
It should only take a mechanic a half hour to swap the exterior handle, so figure whatever the garages are charging in your area for a half hour of labor.
Remove the inside door panel from your 1994 Chevrolet. Remove the linkage from the door handle. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
You can replace the inside drivers door handle by removing the door panel. With the door panel removed the door handle mechanism will be visible. Remove the linkage from the door handle. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
unscrew the inside door panel then unbolt old handle install new one . i recommend you spend a few more dollars and get the good handle it is worth it
its has like a safety pin in the handle where u roll down the window you have to pop off with a flat head screwier driver