0
Remove/Renew motor on 1998 Passat:
1. Remove wipers by prying off the dome cap, undoing nut then pulling wiper of stub being carefull not to let the wiper stub end spring down and damage the screen.
2. Remove the plastic valance at the base of screen by undoing the tork screws at each end, bolt down thro' air cleaner on nearside and various spring clips, remove two water diverters at each end of valance ,prise out the valance from a groove at the base of the screen, stating on end. Do not use metal levers or you may damage the base of the screen.
3. Remove the cover from computer box by undoing the bolts to allow better clearance for the wiper assembly.
4. Remove the three bolts holding in wiper assembly, wiggle free of chassis and unplug connection to motor, with a wee bit of jiggery pokery remove the whole assembly from the car, at this point it may be easier to undo three bolts holding motor to the assembly and bring them out separately.
5 Replace in reverse order after cleaning out the grove for the valance at the base of the screen.
Redards
Dave Madley.
What else can I help you with?
How do you replace the wiper motor on a Honda accord?
Remove the wiring harness from the wiper motor. Remove the windshield wiper arm from the wiper motor. Remove the wiper motor retaining screws. Reverse the process to install the new wiper motor.
How replace the wiper motor Honda Civic?
Remove the wiper arm from the wiper motor. Remove the wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
HOW DO YOU REPLACE A FRONT WINDSHIELD WIPER MOTOR ON A FORD 2003 EXPLORER?
You will have to remove the wiper arms, then remove the cowl, and then the wiper motor.
How do you replace a wiper motor for a 1999 Olds Cutlass?
Remove the wiper arm from your 1999 Oldsmobile Cutlass wiper motor. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
How do you replace the wiper motor on a 1997 Chevrolet C1500 pickup?
Remove the wiring harness from the wiper motor. Remove the wiper arm linkage. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Replace rear wiper motor 2005 Honda odyssey?
Remove the 2005 Honda Odyssey rear wiper arm from the wiper motor. Remove the wiring harness from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
How do you replace a wiper motor on a 1996 Hyundai elantra gls?
* Remove the wiper arms * Remove the windshield wiper cowl cover * Disconnect the electrical connector from the wiper motor and remove the motor * Remove the wiper motor retaining bolts * Pry the linkage arm off the wiper motor pin with a large screwdriver
How do replace a rear wiper motor on a 2002 Chrysler voyager?
Remove wiper arm then remove inside trim panel being careful not to crack it then remove motor connection then motor
How do you replace the wiper motor on a 1998 cavalier?
Begin by removing the traveling arm retaining bolt from your 1998 Chevrolet Cavalier wiper motor. Remove the wiper motor retaining bolts. Remove the wiper motor wiring harness. Reverse the process to install your new wiper motor.
How do you replace the front wiper motor on a 95 Chevrolet Lumina Van?
Remove the wiring harness from the back of your 1995 Chevy Lumina front wiper motor. Remove the traveling arm linkage from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new front wiper motor.
How do you replace rear wiper motor on Honda odyssey?
To replace the rear wiper motor, remove the wiper arm from the rear windshield of the Honda Odyssey. You will then need to remove the motor cover and the shaft nut. Next you need to remove the paneling from the inside of the rear hatch; this gives you access to swap out the motor.
How do you replace the wiper motor on a 1995 Mercury Grand Marquis?
remove the wiper arms, remove the cowl covers, remove the cowl assembly, that is, the big plastic thing that the wiper motoe sits in. It is held is with about five or six 8mm bolts. Unplug the wiper motor and turn the assembly upside-down to access and replace the wiper motor.
