Remove the right rear wheel/tire. Remove the large nut and cotter key, than it is best to utilize a gear puller for this next step, if you utilize a pry bar be very careful not to scratch or damage the inner metal hub that mates to the hub seal. The hub will come off, next remove the small bolts holding the black drum cover in place. Once the outer cover is removed than the brake drum containing the wheel studs will come off. You may have to back off on your brake adjustment to get the drum off, this allows enough clearance between the shoes and drum for removal.
The main components to replace are the shoes if worn, the large o-ring seal for the drum cover, and the main hub/drum cover seal. These parts are available aftermarket a little cheaper than OEM. Try Cheapcycle parts.com, they have very good prices.
Good luck, Jim
.031
There are not any special tools needed to remove the brakes on your 2003 Ford Expedition. You will need a lug wrench, a 9/16 socket, a screwdriver, and a needle nose pliers.
I have a 2003 and the front disc brakes have a torque nut not hex.
You will need to remove the front tires. Remove the brake assembly spring. The brake shoes will come off. Reverse the process to install the new brakes.
Your 2003 Suzuki 125 motorcycle does have an automatic choke. The 2003 Suzuki was not equipped with a manual choke.
how do i bleed brakes on a 2003 hyunia xg350
The 2003 Suzuki Grand-Vitara has a V6 engine.
The 2003 Suzuki Grand-Vitara has 24 valves.
The 2003 Suzuki Grand-Vitara is a gas-powered vehicle.
The 2003 Suzuki Grand-Vitara has a 5-speed manual.
Does 2003 toyota corola ce have abs brakes?
No, the 2003 Camry does not have disc brakes on the rear of the vehicle.