on the caliper take out the bottom bolt, there are two bolts that the caliper slides on and only undo the bottom one. Then the caliper will swing up and allow access to the disc pads . You need to get a G-clamp and push the piston in the caliper back( or else it wont fit back down). put it back together and pump the brakes to set the brake piston b4 you drive or the first time you go to brake you wont have any.
Remove the wheels and remove the 2 14mm headedbolts from the caliper and lift caliper from brake pads www.lextechautomotivellc.com
# Preparation For Brake Pad Replacement # Remove the Wheel # Unbolt the Caliper # Remove the Old Brake Pads # Compress the Brake Piston # Re-Install the Brake Caliper
Lift the car, remove the tire, remove the brake caliper, and remove the old brake pads. Put in the new brake pads, replace the brake caliper, replace the tire and lower the car.?æ
Lift the car on a jack, remove the tire, remove the brake shoe/caliper and take out the old brake pads. Put in the new brake pads, replace the brake shoe/caliper, replace the tire and lower the car to the ground.
This link has the manual on how to change the brake pads. http://files.mytouareg.info/autoindex.php
When you remove the caliper, the pads can be pressed out by hand.
Remove wheel then calapse caliper with a screwdrive. Remove caliper has two 15mm. bolts.Pads will slide out don not remove clips to hold pads in. Put new pads in and put caliper back on.
take the tire off and then remove the brake caliper remove the brake pads take a c clamp and compress the brake piston replace the pads then put the caliper back on tighten the caliper bolts put the tire back on then turn car on and push on the brakes a couple of times
Remove the tire and wheel from your 2005 Vectra. Remove the brake spring and break caliper from the brake pad assembly. The brake pads will come off. Reverse the process to install the new brake pads.
you have to remove the caliper to access the brake pads
You have to remove the brake caliper before you can remove the brake pads. I recommend you use a piece of wire and tie the caliper up to the spring to hold it. Now that the rotor is out of the way, you can remove them by sliding them out.
It is important to know how to change a cars brake pads. Lift the car, remove the tire, brake shoe and pull the brake pad out of the brake shoe/caliper.