Remove any bolt on pulleys, remove center bolt counterclockwise, remove the harmonic balancer with proper puller available for rent or sale at your local auto parts store.
remove belt via tensioner, four bolts on pulley, five on pump, clean and reverse
Take it to a mechanic
1984 Jaguar XJ6 4.2L FI 6cyl
If it is the 2.4 (4cyl) or 3.5 (6cyl) it is behind the timing belt. If it is a 2.7 (6cyl) it is located on the engine near the bellhousing, bank two side (side facing radiator)
no the bolt on the pulley does not need to be loosen just put ur wrench or rachet on the bolt head and turn either way till the pulley moves
Back of the engine, through the top passenger side of the bell housing.
1991 Chevy Astor Van 6cyl the pulley below alternator isn't moving can I bypass it or is ity important. Joezilla
Counterclockwise
some wut of an Answeryou take off the center bolt then you rent/buy a harmonic dampener puller/installer and screw the three 3/8 bolts into the harmonic balancers body and pull it off by turning the center stud wich seperates the balancer from the crankshaft. and follow the same steps for re-installation now you are pressing the new balancer on the crank make sure the keyway on the shaft and the pulley are aligned or its gonna cost you a new crankshaft and if you replace the crankshaft might as well re-build the engine. It's obvious that before any thing you have to remove your belt/fanclutch and fan/ fan shrowd or you will not have any room to work.94 grand Cherokee Laredo 4.0berto
Any Radiator from 79 to 93 Mustangs and t-birds 4cyl 6cyl and 8 cyl
remove the alternator and bracket it is under the bracket
we would need an bit more info? engine 4cyl, 6cyl? 2wd 4wd?