0
what i did was i got a shop vac those big powerful one's then a small vacuum line hose from my car then i taped that to the end of the shop vac's vacuum tube, i tapped it enough, so enough concentration of sucking power can go threw the small vacuum hose. then i feed the hose down into the spark plug hole and wallah clean piston head.
What else can I help you with?
How do you remove the cylinder head of a opel corsa 1.7 diesel?
To remove the cylinder head of an Opel Corsa 1.7 diesel, first disconnect the battery and drain the coolant and oil. Remove the intake and exhaust manifolds, along with any attached components, such as the turbocharger if applicable. Then, unbolt the cylinder head by loosening the head bolts in the correct sequence and order. Carefully lift the head off the engine block, ensuring that no debris falls into the engine.
How do you remove cylinder head from 1991 Mercedes Benz 190e 2.3?
how remove cylinder head
How do you remove 2005 suzuki Verona cylinder head?
To remove the cylinder head from a 2005 Suzuki Verona, first ensure the engine is cool and disconnect the battery. Remove any components obstructing access, such as the intake and exhaust manifolds, and drain the coolant. Next, unbolt the cylinder head by loosening the head bolts in the correct sequence to avoid warping. Finally, lift the cylinder head off the engine block carefully, making sure to check for any remaining gaskets or debris.
How do i remove the cylinder head on a rover 75 cdti?
To remove the cylinder head on a Rover 75 CDTi, first disconnect the battery and drain the coolant. Then, remove the intake and exhaust manifolds, along with any associated components such as the turbo (if applicable). Next, undo the head bolts in the correct sequence, and lift the cylinder head off the engine block carefully. Ensure to check for any remaining gasket material or debris before installing a new head gasket.
How do you change lifters on a 1995 jeep cherokee Laredo?
You have to remove the cylinder head(s) to access the lifters.You have to remove the cylinder head(s) to access the lifters.
Do you have to remove the cylinder head to change the head gasket?
Yes.
How do you dismantle a cylinder head for a Daewoo Matiz?
To dismantle the cylinder head of a Daewoo Matiz, first ensure the engine is cool and disconnect the battery. Remove the intake and exhaust manifolds, along with any attached components like the throttle body and fuel lines. Then, unbolt the cylinder head from the engine block, typically starting with the rocker cover to access the head bolts. Carefully lift the cylinder head off, ensuring no debris falls into the engine block.
How do you change head gasket on 1.8 L VW Passat engine?
Remove the cylinder head from your VW engine. Remove the head gasket and clean the head gasket surface. Put the new head gasket on and return the cylinder head to its original position.
How do you remove a cylinder head?
Start with undressing the cylinder head inlet and exhaust manifolds get a container for bolts and any other small stuff undo all of the cylinder head studs and lift off the cylinder head.
Fix a Blown cylinder head gasket?
remove head and replace gasket :)
How do you change head gasket on Chevy Lumina?
You will need to remove the cylinder head from your Chevy Lumina engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder had to its original position.
How long to remove a cylinder head from a vauxall zafira?
2 hours to remove it :)
