First unplug the wiring connection, then if the pto clutch has been on the mower for a while, remove the bolt from the bottom of the clutch, then spray PB Blaster in the bolt hole & let it sit for about 30 minutes. Make sure the belt has been removed from the upper pulley. Take a 3-Legged puller & attach around the clutch. The clutch may have to be tapped several times with a hammer to get it to move, or let the penetrating spray work longer.
take the three nuts off counting the number of turns so you can put it back the same. use a gear puller to pull the pulley side off the spindle. then I used an air hammer and a big socket to drive or press the other side off the spindle.
what are the torque specs for clutch and fly wheel model 5700
Check out the related link and look under centrifugal clutch. It is surprising that the same clutch in a chain saw is in a John Deere Gator.
a john deere 630 is a two cylinder tractor that has a hand clutch two wheel drive
A John Deere model A holds 9.25 qts of oil.
The John Deere 850 is a compact tractor and the most recent model available is John Deere Z850A. This newer model offers more horsepower and hitching capability compared to the John Deere 850.
It will fit according to John Deere Attachment Fit Guide
.18
The best place to find a John Deere Model A tractor would be on the official John Deere site. Their site would give one information on where a tractor can be purchased.
clutch went out on mine
The John Deere model 60 was made from 1952-1956. Here's a website full of information about the model 60...see related link...
The most successful tractor model built by John Deere was the Dain All-Wheel-Drive. The most successful two-cylinder tractor produced by John Deere was the model A. The 730 was also very popular, as was the 4020.
No John Deere break down all of the time where i work they have John Deere and it seems like they spend more time in the mechanic then being used for work