with a motor dolley
When working on an engine it is important to have a diagram to help a person recognize the parts. A diagram for a Ford Tempo Engine is found in its manual.
2.3 L engine. You have to remove the oil pan and the front of the engine, including the engine mount. There is enough room.
Have to remove the transmission.
To remove the alternator from a 1994 Ford Tempo, first disconnect the negative battery cable to ensure safety. Then, remove the serpentine belt by loosening the tensioner. Next, unbolt the alternator from its mounting bracket and disconnect the electrical connections. Finally, carefully lift the alternator out of the engine compartment.
On a 1991 Ford Tempo, the water pump is located at the front of the engine, driven by the serpentine belt. It is situated on the engine block, typically near the lower section of the engine, making it accessible for maintenance. To reach it, you may need to remove the serpentine belt and potentially other components depending on the specific engine configuration.
10W30 in the engine.
2.3 L engine. Should come out from the bottom. For more room, remove the torsion bar plate.
The engine compartment fuse and relay box in a 1993 Ford Tempo is on the fender wall. It is located on the same side as the battery.
Between the engine and the transmission.
Yes , the 2.3 litre four cylinder engine in a 1994 Ford Tempo has a timing CHAIN
If the engine in the Ford Tempo is a 2.3 liter engine, the wire order is 1-3-4-2. If the engine is a 3.0 liter engine, the wire order is 1-4-2-5-3-6.
Follow top rad. hose.