Try going to a hardware store & buying a coping saw blade {it looks like a piece of wire with a spiral cut running down it} cut the end off the blade and with the ignition turned to the place where you would pull the key out, slide the wire of the blade in next to the key and gently slide it out.... the spiral cut in the blade should grab the key and pull it along with the blade.... if that doesn't work you may need to see a locksmith.
light a fire cracker and put it near the point of stuckness, you may need to buy a new ignition system but atleast the key will be out
i have a 06 Chevy cobalt and can't get the key out of the ignition switch
how to remove key stuck in ignition switch in Chevy colbalt
See You-Tube Video : http://youtu.be/lBNUuO4ldfI How to Remove a broken key from an Ignition. Using the Broken Key Extractor Kit from: www.WedgeCo.com
The entire ignition switch assembly will unholy from the steering column. The key is required to remove the cylinder from the switch.
Chevy Tahoe Ignition Key Starter Switch
NOOO get the broken key out of the ignition by pulling the black protector off and then take your key to a key maker and have him replicate the toothing from your key
With no key you will have to drill out the existing tumbler assembly from the switch in order to unscrew the ignition switch bezel.
Take it out haha
how to remove ignition barrel merc 1995 200e estate
insert key into ignition and turn to accessory and get a pin and depress it into the hole by the key and pull the switch out and then you can unscrew the big nut off the switch.
If you can reach the broken key with a pair of needle nose pliers, you may be able to pull it out. Otherwise, it is a job for a professional locksmith.
Flush the lock with a lubricant. Use the handle of the broken key as a guide. Find a thin wire and stiff it along the sides of the broken key part. Hold the wire in place and remove the part.