0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you remove the front outer door handle on a 2013 Ford Fusion?
how to remove front outer door handle on a 2013ford fusion
How to remove 1994 Saturn front outer door handle to be able to remove outer door panel?
I don't know - but the question about the 1993 door handle is the same...
How do you remove Nissan dualis door handle outer 2011?
How do you remove outer door handles on Nissan dualis
How do you remove the interior door pannel on a 94 saturn?
The interior door panel cannot be removed from the door. To work on the inside mechanisms of the door, remove the outer, plastic skin. First remove the outer door handle; lift the handle enough to expose the two pins that hold the handle to the door mechanism. Push the pins through and remove the handle. Next remove the screws around the perimeter of the door. They are visible when the door is open. After all of the screws are removed, lift the outer door skin off and you have full access to the inside of the door.
How to remove door actuator on a 99 Mercedes ml430?
Start by removing the door panel for the effected door latch. The latch should have about 3 torx screws holding it in place. You also need to remove the outer door handle, and have to use a long thin torx bit to gain access to the screw. once the outer door handle is removed, then you can remove the door latch/lock assembly. depending on which door, you also might need to drill out a couple of rivets on the window regulator to be able to remove the latch.
How do you remove the inside door panel on a 1997 Saturn Wagon?
The inside door panel cannot be removed; instead, to get to the inner workings of the door remove the OUTER panel. Lift the outer door handle to expose the pins that hold the outer handle to the door mechanism. Then press out the pins and remove the handle. Then remove the screws around the perimeter of the door that hold the outer panel. The panel should lift off, exposing all of the inner workings, then you can verify that the inner panel does NOT come off.
How do you replace the door handle on a 1998 Explorer?
If it's the outer handle you would need to remove the door panel, then remove the rivits that hold the handle to the outside of the car. Then remove the window track and slide it down inside of the door and unhook the rod on the handle,and now you can slide the door handle out.
How do you take off a car door panel?
Since this question is in the Saturn area, it must be assumed that you are asking about removal of a Saturn door panel. The inner door panel of a Saturn is not removable, it is integral to the door frame. However, you can remove the outer door panel. First, remove the outer door handle; lift the handle enough to reveal the pins that hold the handle to the door latch mechanism, then press out the two pins and set the handle aside. Next, open the door and remove the screws around the perimeter of the outer door panel. After the screws are removed, the outer door panel should lift off easily.
How do you replace driver door lock actuator on a Mercedes ml 320?
Replacing door actuator on ml500. How do I remove the outside door handle?
How do you replace the drivers side door handle on a 1996 GMC Sierra?
Assuming you are referring to the outer door handle, remove the inner door panel and look at the back of the handle. You will see a couple of steel rods attached to the handle, remove these(they just unclip)and move them out of your way. You should be able to see a couple of small nuts holding the handle to the door. Remove these and the handle can be pulled out of the door from the outside.
How do you replace an outside door handle for a 1997 Camry?
Remove the inside door cover. The handle is attached on the inside of the outer door panel. You must remove all of the lock and mechanism linkage to remover the handle. It's pretty tricky but take your time and you will be fine.
How do you replace the window guides on a 1996 Saturn sl2?
Remove the OUTER door skin to get to the window hardware. Lift the outer handle, press out the two retaining pins then, with the door open, remove the screws that are around the edge. You will find some of them by examining the bottom inside of the door. After the screws and outer door handle are removed, the door skin just lifts off and you can get to all of the window hardware.
