a press
To replace the piston rings on your Lancer C12W engine you will need to have a lot of time, patience, and a second vehicle. You need to take your engine out of the car, pull your head off of the engine, pull the oil pan off, unbolt all pistons from the crank shaft remove the crankshaft and then pull your pistons out.
Here´s the answer..http://forums.evolutionm.net/lancer-how-tos-installations/297464-how-amplifier-installation-remove-radio.html
Quite simply you have to remove the pistons. first drop the oil pan second disconnect connecting rod end caps third either remove crankshaft or remove cylinder heads then finally remove pistons. removing pistons are commonly removed from the bottom of the engine. they are pushed out of the top where the cylinder heads sit. Once removed you can replace the rings and then you have to get a piston ring compressor to reinstall the pistons.
go to file manager and remove it man
remove the broken one and replace with a new and working bulbs.
To remove weight on any car you should try installing a weight reduction kit on it.
how do you seperate the the centre mirrow head from the screen mount
the dash just removes without having to untighten any screws
The easiest way to reset the your 2007 Mitsubishi Lancer car alarm is to remove the car alarm fuse. Keep the fuse out for 10 seconds and replace it to its original slot.
In a 2004 Mitsubishi Lancer replacing the rear light bulb is relatively easy. First remove the plastic cover from the dome light. Unscrew the light bulb and insert the replacement.
you can't there is a check ball that is located in the filler neck you must remove a line and try to siphon that way
Is there a special tool that is needed to remove and replace the brake shoes?