0
to remove the tensioner first you need to remove the bracket that holds it. once you have removed the pulley bracket with the pulley still attached to it,
1 remove the retaining nut, and washers.
2 You will need to use a press to remove the bearing from the post..
3 If you are replacing the bearings on the pulley you will need to remove the "C" clip retainer, and press the bearing out.
What else can I help you with?
How do you remove a power steering pulley on a 1997 Nissan Altima?
how to remove a power steering pulley on a 1997 Nissan altima
How do you remove the steering pump pulley on a Nissan 200sx?
Take off the sockets and remove the pump pulley.
How do you remove a 2005 Nissan altima auto tensioner pully?
The 2005 Nissan Altima auto tensioner pulley can be removed by removing the center bolt. You will need to hold the pulley stationary while you loosen the bolt.
How do you remove power steering pump from a 1995 Isuzu trooper?
Loosen the tensioner pulley. Remove the power steering belt. Remove the power steering hose. Remove the power steering retaining bolts. The power steering pump will come off.
How to replace the power steering pump silhouette?
Remove the belt by loosening the tensioner pulley. Remove the power steering hoses. Remove the retaining nuts. Reverse the process to install the new power steering pump.
If the belt tensioner pulley broke off how do you get the rest of it off?
DEPENDING ON WHAT ENGINE IT IS, YOU MAY HAVE TO REMOVE THE POWER STEERING PUMP AND A/C COMPRESSOR.
How do you replace a power steering belt on a BMW e30?
Loosen the tensioner pulley. The power steering belt will come loose. Remove the power steering belt. Reverse the process to install the new power steering belt.
How remove tensioner pulley on a 2002 camaro 3.8?
One bolt holds the tensioner to the engine, take it off to get the tensioner off and then you can get to the bolt that holds the pulley to the tensioner.
How do you take off power steering tension pully?
I believe you are referring to the power steering pulley. The tensioner pulley is a different system altogether. You must, however, locate the tensioner pulley to remove the belt before you remove the power steering pulley.The tensioner pulley should be generally easy to access from the top of the engine bay. It is the only pulley that should be attached to an arm that is mounted somewhere close on the block. (with the engine running at idle, look for the pulley that appears to be bouncing up and down). Turn the engine off before next steps...Use a tensioner tool to move the tensioner pulley away from the belt. With tension removed from the belt, the belt should slide off of the pulleys. With the belt now removed, you will loosen the bolt that holds the power steering pulley in place.(Power steering pulley is located on the power steering gear box, locate this by finding the power steering fluid reservoir. The reservoir should sit directly above the gear box).Once the bolt is removed, the pulley should come off the shaft (with some force). You may have to use a pulley puller tool if it does not come off by hand.Installation is reverse of removal. Good luck.
How do you put a pulley on a tensioner in a 1998 dodge caravan?
You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.
How do you remove alternator belt on a Nissan Sentra 2005?
To remove the alternator belt on a 2005 Nissan Sentra, first, locate the tensioner pulley and use a wrench or ratchet to relieve tension on the belt by rotating the tensioner counterclockwise. Once the tension is released, slip the belt off the alternator pulley and any other pulleys it wraps around. Finally, carefully remove the belt from the tensioner. Make sure to check for wear or damage before installing a new belt.
How do you remove the serpentine belt on a c5 corvette?
You can remove your serpentine belt by loosening the tensioner pulley. Pushed the tensioner pulley to the right and the serpentine belt can be easily removed.
