Remove wheel, Remove drum or disc brake rotor,remove rear differental cover. Remove shaft between the spider gears that is held in by a lock bolt. Shove the axle from the outside toward the differential and remove the "C" clips that hold the axle in inside the diff. and then the axle can be removed.
To remove the rear axle from a 1997 GMC Yukon, first, elevate the vehicle securely and remove the rear wheels. Next, disconnect the brake lines and the axle shafts by unbolting the differential cover and removing the axle retaining bolts. After that, support the rear differential and unbolt it from the suspension, then carefully lower it to remove the axle assembly. Be sure to consult a repair manual for specific torque specifications and procedures.
Remove the tire and wheel from your 2003 GMC 2500 Sierra. Remove the end of the axle. Using a seal puller remove the axle seal. Reverse the process to install your new rear axle seal.
yes
To remove the rear axle from a 1999 GMC Yukon, begin by safely lifting the vehicle and securing it on jack stands. Remove the rear wheels and brake components, then drain the differential fluid and disconnect the drive shaft. Next, unbolt the axle housing from the suspension and any mounting brackets, and finally, carefully slide the axle out of the housing. Make sure to consult a repair manual for specific torque specifications and detailed steps.
It is located under the vehicle between the rear bumper and the rear axle you will need your jack handle to winch it down
The 2003 GMC Yukon has 39.4 in. of rear head room.
The 2003 GMC Yukon has 61.3 in. of rear hip room.
The 2003 GMC Yukon has 65.1 in. of rear shoulder room.
were is the rear door relay located 0n 2003 yukon
The 2003 GMC Yukon-XL has 39.1 in. of rear leg room.
The rear track of the 2003 GMC Yukon is 5 ft. 6 in. (66 in.).
how to remove rear axle from 1988 f250 ford