You will need to remove the tail light covers in the cargo compartment. Remove the wiring harness. Remove the tail light assembly retaining bolts.
Open the trunk or hatch, remove the 2 screws. There are 2 friction posts (towards the outside of the assembly) still holding the assembly on. With gradually increasing force, work the tail light assembly straight out towards the rear.
To remove the parking light from a 2009 Kia Spectra, first, open the hood and locate the back of the light assembly. You may need to remove the retaining clips or screws securing the assembly. Once loose, gently pull the assembly out and twist the socket counterclockwise to remove the bulb. Replace the bulb if needed, then reassemble everything in reverse order.
Remove the rear tire and wheel. Remove the brake spring from the brake assembly. Remove the brake pads. Reverse the process to install the new brake pads.
1. Behind each light you will see a small door in the back liner. Remove the 2 plugs in each door by pulling them straight out. 2. Gently pull back liner doors to expose rear of light assembly. 3. Remove three brass 10mm nuts from exposed bolts. 4. Slightly lift up bottom inside corner of light assembly, Pull back or sideways to center of bumper or trunk rear with wiggle movement to pull out rear light assembly. Takes a little while, but piece of cake.
Remove the wiring harness from your 2000 Kia headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight assembly.
3 10mm bolts hold on the headlight assembly. Remove bolts and lift assembly slightly from the bottom to release it. Pull assembly forward. Twist marker light holder to remove it. Bulb pulls out. Reverse for installation.
Remove the tail light assembly (as I recall, it attaches with a couple of screws and is clipped to the body). Remove the bulb holder, replace the bulb, reassemble.
Open the hatch door and locate the two screws holding the tail light assembly and pull the assembly out of the housing. Unscrew the cover assembly, remove and replace the bulb. Reinsert assembly and replace screws
Remove the cover from your 2001 Kia rear speakers. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new rear speakers.
To remove a rear door panel on a 2006 kia sodona you need to take it to a professional mechanic to have it removed.
The taillights on a 1999 Kia Sephia are replaced through the cars trunk. Remove the plastic covers from the light housings and replace the bulbs.