To remove the rear seat in a Renault Clio 1.2, start by locating the seat release mechanisms, typically found at the base of the seat. Pull the release levers or buttons to detach the seat cushion from its clips. For the seat back, check for bolts or screws securing it to the car's body, and remove them using a suitable tool. Once unfastened, carefully lift and remove the seat back from the vehicle.
To remove seats from a Renault Scenic, start by sliding the seat forward to access the rear bolts. Use a socket wrench to remove the bolts securing the seat to the floor. Once the bolts are removed, tilt the seat backward and disconnect any electrical connectors if applicable. Finally, lift the seat out of the vehicle carefully.
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
To lift the rear seat of a Renault Laguna 2, locate the release mechanism, which is typically found at the base of the seat or on the side. Pull the lever or press the button to unlock the seat. Once released, you can lift the seat cushion upwards to access the storage space beneath or to remove it completely if needed. Ensure you secure it back in place after lifting or reassembling.
Lift them up!!!!
Remove the bolts fastening the rear seat cushion (Figure 7.52).Remove the rear seat cushion assembly.Remove the screws and remove the side rear seat back (Figure 7.53).Remove the lower bolts fastening the rear seat back.Tightening torque - 17-26 NmFlip forward the rear seat back, remove the bolts and remove the back seat.Tightening torque - 17-26 Nm
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
How do you remove the rear seat on a 2002 diamante
Remove rear seat and panel underneath seat. How do I remove rear seat?!?!
remove the 2 bolts on the floor in front of the seat, and the 3 bolts on the floor at the rear of the seat.
To remove a front seat from a Renault Laguna, first, ensure the seat is fully reclined and move it as far back as possible. Locate the mounting bolts at the front and rear of the seat base, typically covered by plastic caps that need to be pried off. Use a socket wrench to remove the bolts, then disconnect any electrical connectors for seat features like airbags or power adjustments. Finally, gently pull the seat away from the floor mounts and lift it out of the vehicle.