Remove the bolts fastening the rear seat cushion (Figure 7.52).
Remove the rear seat cushion assembly.
Remove the screws and remove the side rear seat back (Figure 7.53).
Remove the lower bolts fastening the rear seat back.
Tightening torque - 17-26 Nm
Flip forward the rear seat back, remove the bolts and remove the back seat.
Tightening torque - 17-26 Nm
2000 sonata rear seat removal
The bolts are visible at the base of the seat. Remove them and lift out the seat.
pull up on the front part of the seat
you need to remove the rear seat
The seat track is bolted to the floorboard. ANSWER: my 2001 Taurus had clips for the rear seat cushion where if you push the cusion twords the rear of the car then pull upward the cushion should come off...
no
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
To remove the rear seat from a 2001 Mercedes-Benz S500, start by locating the seat release clips or bolts, which are typically found at the base of the seat. Use a socket wrench or appropriate tool to remove these fasteners. After unbolting, gently lift the seat cushion upward and forward to detach it from the clips. If the backrest is separate, check for additional bolts or clips securing it and repeat the process to remove it.
To remove the rear seat from a 2001 Mitsubishi Montero, start by locating the seat release mechanisms, usually found at the base of the seat. Lift the seat cushion to access the bolts or clips securing it to the floor and remove them using the appropriate tools. For the seatback, there may be additional bolts at the base or release levers on the sides; unbolt or release these to detach the seatback. Finally, carefully lift the seat out of the vehicle.
In my 2000 LeSabre, it's under the back seat. Remove the rear seat and I'll bet it's there.
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.