How do you remove rubber black mark on floor?

Answer 1

How to Remove Tire Marks by Pressure Washing:

Step 1: Prepare driveway and surrounding area

Clean up any dirt and debris on the concrete with a large push broom. If your driveway is close to any walls, doors, or anything that could be damaged by missed debris, with tarp and masking tape to avoid damage.

Step 2: Degrease driveway surface

Next, degrease the concrete surface. A degreaser helps break up any stubborn stains on your driveway. Some pressure washers include an attachment tool that you can use to degrease, but if not, you’ll need to scrub the concrete with a push broom or a stiff brush.

Step 3: Prepare pressure washer

Once you’ve used degreaser on your driveway, prepare your pressure washer. For faster and easier pressure washing of flat surfaces like your driveway, use a pressure washer surface cleaner from BestCarGurus.

Why do you need a Pressure Washer Surface Cleaner from BestCarGurus?

The use of hard scrubbers and harsh chemicals often do more damage than good. Here are a few reasons why a pressure washer surface attachment is beneficial.

Visibly more cleanliness

Versatility in cleaning almost all floor surfaces

Hassle-free and effortless work

Considerably lower cost in terms of labor (when hiring a professional)

Flexibility when handling both hot and cold pressure washer cleaning

Universally compatible with most pressure washer brands and models

Impressive “hover” or “floating” option, which actually allows you to clean floors without contact

Step 4: Pressure wash your driveway

Begin spraying your driveway with the pressure washer, starting from the house working your way down to the other end, overlapping each stroke. It’s best to move right to left and continue in that pattern for the entire length

Apply the detergent spray evenly across the surface, covering the entire area. You should see the detergent suds appear as you soak the area. Once you have covered the driveway with the detergent, let it sit for 10 to 15 minutes, watching to make sure it does not dry.

When time is up, switch to the high-pressure nozzle and rinse the concrete. Move in the same right to left pattern as you did when you applied the detergent.

Instead of hiring a pro and spend $$$ to have your driveway pressure washed, you can do it your own through these steps and with the use of a pressure washer surface cleaner.